Cooper Security M-Series Manuale delle Istruzioni Scaricare il pdf (Pagina 58)

4. Programming

52 496478

Access Mode (Command 114)

This function allows you to provide extra security when a remote PC is

dialling into the system. Once the PC is connected to the system then the

<Downloader> has access to all system programming commands. If you

wish to provide secure access then either use Option 0 or Option 1 below.

Alternatively you can use command 110 if you want an engineer present to

provide access for a remote PC connection to the panel. Please note that

you cannot use secure callback with command 110.

Option 0 Call Out Only.

Operation: Someone must start a call to the remote PC

manually using Command 0 in User Mode. User com-

mand 0 calls the first <Downloader> telephone number

(see command 118).

Option 1 Secure Callback.

Operation: When the remote PC calls, the system waits

for the set number of rings (see command 112) and then

answers. The remote PC sends a panel ID, the <DOWN-

LOADER> software version, and indicates which of the

two Downloader Telephone Numbers to use (see com-

mands 118/119). The system checks that the remote PC

is sending the correct panel ID, and is using the correct

<DOWNLOADER> software version. If these items don't

match then the system hangs up. If the items do match

then the system hangs up and, after a short delay, the

system seizes the telephone line and calls the PC using

the indicated Downloader Telephone Number.

Note: Secure Call Back must be Disabled (Default) until the first “attended” upload

has been performed. This first upload can be carried out either using command

110 option 1, or using command 114 option 0.

Option 2 Unattended Mode.

Operation: The control unit answers as soon as the

number of rings set in commands 112 and 113 have

elapsed.

Note: The <Downloader> operator can choose to use Secure Callback, even though

the alarm system is programmed for Unattended Mode.

Communicator Telephone Numbers (Command 115/116)

Use this command to store the telephone numbers that the communicator will

use. The system will accept one telephone number if you choose Single call

mode in command 101, or two telephone numbers if you select Alternate or

Dual call mode.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 70 71

Nessun commento

Cooper Security M-Series Manuale delle Istruzioni Pagina 58