Cooper Security M-Series Manuale delle Istruzioni Pagina 20
- Pagina / 71
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
14 496478
3. Installation
Wiring the Control Unit
Cable Entries
The control unit case back provides several cable entries. The back is
designed to stand away from the wall to leave space for cables.
Mains Connection
The control unit must be permanently connected to a spur outlet fitted with a
readily accessible disconnect device. Connect the mains supply to the control
unit using the 3-way terminal block located in the control unit back. Secure
the mains cable to the case anchor point using the cable tie provided. Note
that the control unit has a T-250mA internal mains fuse. All electrical connec-
tions should be carried out by a qualified electrician and must comply with the
current IEEE Wiring Regulations: 16 Edition, Appendix 5 - Standard Circuit
Arrangement.
To Control Panel
Transformer
L
N
T 250mA 250V
230V ~50Hz 200mA
Figure 9. Mains Connection
Connect the 21VAC lead from the mains transformer to the main pcb.
Caution: Do not apply mains power at this point. Do not work inside the
control unit case when mains power is present.
- INSTALLATION AND 1
- PROGRAMMING GUIDE 1
- Contents 3
- 496478 iii 5
- 1. INTRODUCTION 7
- Figure 1. 9750 System Layout 8
- 496478 3 9
- 4 496478 10
- System Features 11
- Detectors 11
- 9755 Hardwired Expander 11
- 9955 Radio Expander 11
- User Control 12
- 2. Technical Description 13
- Control Unit PCB and Case 14
- 9755 Expander 15
- Compatible Equipment 16
- 3. INSTALLATION 17
- Fitting a 9930 LCD Keypad 18
- 496478 13 19
- Wiring the Control Unit 20
- Cable Entries 20
- Mains Connection 20
- Remote Keypads 21
- Connecting Keypads 22
- Exit Terminate Button 22
- Sounders 22
- Detector Circuit Connections 23
- Connecting a 9755 Expander 23
- Using Programmable Outputs 24
- Wiring Keyswitches 25
- Installing a Communicator 26
- Statutory Information 27
- Application 27
- Compatible PABXs 27
- Approval 27
- Safety Notice 28
- Connecting the Telephone Line 29
- 24 496478 30
- 496478 25 31
- Fitting a Battery 32
- Initial Start Up 33
- 28 496478 34
- 4. Programming 35
- 30 496478 36
- 496478 31 37
- 32 496478 38
- * See “5. Testing” 39
- Communications Programming 40
- 496478 35 41
- Leaving Programming Mode 42
- Engineer Reset 42
- Re-entering Programming Mode 42
- Programming Reference 43
- 38 496478 44
- 496478 39 45
- RedCare Reset (Command 23) 46
- Status Display (Command 28) 47
- System Reset (Command 33) 47
- PA Reset (Command 34) 48
- Alarm Abort (Command 36) 48
- 496478 43 49
- CSID Code (Command 50) 50
- 496478 45 51
- 46 496478 52
- 496478 47 53
- Call Mode (Command 101) 54
- Reporting Type (Command 103) 55
- Dynamic Test (Command 108) 56
- Download Mode (Command 110) 57
- Rings to Answer (Command 112) 57
- 52 496478 58
- 496478 53 59
- Report Mode (Command 131) 60
- 496478 55 61
- 56 496478 62
- 5. Testing 63
- 58 496478 64
- 496478 59 65
- 60 496478 66
- 64 496478 70
Prodotti e manuali riguardandi Sistemi di controllo di accesso Cooper Security M-Series
(36 pagine)Perreaux Amplificateurs audio manuels d'utilisation
À partir de S
Commenti su questo manuale