Cooper Security M-Series Manuale delle Istruzioni Scaricare il pdf (Pagina 13)

496478 7

2. Technical Description

Specification

Operating temperature = -10° to +55°C

Humidity = 96% RH

Dimensions = 243mm W, 234mm H, 87mm D

Weight = 2.45 kg (without stand-by battery)

Conforms to EN50131-1 Grade 1 and current BS4737 Part 1 for remote

signalled systems, ACPO-IAS Policy, NACOSS NACP14, ABI log require-

ments.

Power Supply

System power supply = 230VAC (ambient Temp. 20°. C) 1A total

Control unit power = 50mA nominal quiescent, 150mA active

9930 Remote Keypad = 20mA quiescent with keypad backlight on

Standby Battery = 12 Volt, 7AH rechargeable lead-acid, Gel Type

battery (not supplied)

Conforms to EN50131-6 Type A power supply for Grade 1 systems.

Outputs

O/P 1, 2, 3 = open collector transistor outputs, 500mA, 12VDC.

negative applied

LS = can support two parallel connected externally

mounted 16 Ohm loudspeakers for internal sounder

or EE tones.

AUX (for detectors) = 500mA, 12VDC

Coms OP1-5* = 12V logic outputs, -ve applied in alarm (+ve removed).

Inputs

TR = Tamper return for bell.

Tellback/RedCare reset* = +12V applied to operate reset.

LIne Fault input* = +12V applied to indicate line failure.

* These outputs and inputs appear as pins on the connector for the plug by

communicator. See "3. Installation - Fitting a Plug by Communicator".

Fuses

F1 - 12V AUX = 1A Fast

F2 - Battery = 2A Anti Surge

Caution: When replacing fuses use the ratings quoted above.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 70 71

Nessun commento

Cooper Security M-Series Manuale delle Istruzioni Pagina 13