Cooper Security M-Series Manuale delle Istruzioni Scaricare il pdf (Pagina 31)

496478 25

3. Installation

Figure 18. Fitting a Plug ByCommunicator

4. Make any necessary connections from the communicator to the Comms

Wiring Harness. Figure 19 shows the outputs available on the free ends

of the Comms Wiring Harness.

1 (Brown) Fire. -ve applied (+ve removed) in alarm

2 (Orange) PA. -ve applied (+ve removed) in alarm

3 (Yellow) Burg. -ve applied (+ve removed) in alarm

4 (Green) Open/Close. -ve applied (+ve removed) in alarm

5 (Blue) Alarm abort. -ve applied (+ve removed) in alarm

6 (Purple) Line Fail Input. +12V applied to indicate telephone line fail

7 (White) Tell Back Input +12V applied to change from engineer to customer reset

8 (Black) 0V

9 (Red) 12V

Figure 19. Communications Wiring Harness.

5. Plug the Comms Wiring Harness onto the communications connector on

the main PCB (see Figure 4).

6. Re-fit the PCB to the support pillars.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 70 71

Nessun commento

Cooper Security M-Series Manuale delle Istruzioni Pagina 31