Cooper Security M-Series Manuale delle Istruzioni Scaricare il pdf (Pagina 47)

4. Programming

496478 41

Local Sounder Delay on Entry (Command 26)

Use option 1 (default) to delay local sounders for silent communications when

an entry alarm is triggered (required by some police forces). This option is

only valid if you have programmed a Bell Delay.

Use option 0 for no delay.

Exit Fault External Sounders (Command 27)

When programmed with option 0 of this command the system operates the

internal sounders if the user tries to exit while a zone is still violated (for

example a door is not shut). When option 1 is programmed the system

operates the external sounders as well as the internal sounders.

Status Display (Command 28)

Use option 0 of this command if you do not wish to show keypad displays

permanently. The keypad displays “Level Set” for 180 seconds after the user

sets the system and then reverts back to the time and date display. Use this

option when installing a system in the U.K.

When set to option 1 the keypad displays “Level Set” the whole time that the

alarm system is set.

Silent or Audible PA (Command 30)

This command selects how the system responds when a PA zone operates.

Option 0 (audible PA): the system operates the sounders and, if a

communicator is fitted, sends a PA message to the central station.The

keypad displays the PA zone when a user disarms the system.

Option 1 (Silent PA): The sounders stay silent. If a communicator is

fitted the system sends a PA message to the central station.The keypad

displays the PA zone when a user disarms the system.

System Reset (Command 33)

If you wish to make the system engineer reset, then use option 1. For user

reset use option 0.

Certain types of event will always need an Engineer reset, no matter what

option you choose for command 33. These events are:

Activating the tamper switch on the control unit, keypads, or expanders.

Auxilliary 12V supply fuse blown.

Remote expander failure caused by a remote keypad not responding

correctly.

Tamper return violation (usually from the external bell).

A low battery at the control unit.

Soak test fail indication.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Nessun commento

Cooper Security M-Series Manuale delle Istruzioni Pagina 47