Cooper Security M-Series Manuale delle Istruzioni Scaricare il pdf (Pagina 19)

496478 13

3. Installation

6. Mount the front of the keypad (containing the keypad pcb) onto the

backplate and make sure that the tamper switch operates.

7. If the tamper switch does not operate then rotate the cam until the

tamper switch operates correctly when the front of the keypad is

mounted on the backplate.

Fitting a Remote 9925 Arming Station

Figure 8 shows the 9925 Arming Station.

1. If necessary, lift the flaps on the faceplate of the keypad and undo the

four screws holding on the back of the case.

2. Hold the keypad back in place and mark, drill and plug the position of

keyhole.

3. Mount the keypad back with a single screw through the keyhole.

4. Mark, drill and plug the position of two more mounting holes.

5. Fix the keypad back in place with two more screws.

Tamper bar

Keyhole

Cable access

Fixing holes

Flap

Cover screws

Figure 8. 9925 Backplate

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 70 71

Nessun commento

Cooper Security M-Series Manuale delle Istruzioni Pagina 19