Cooper Security 9651 Manuale di Installazione Scaricare il pdf (Pagina 51)

9651 Programming - Programming Commands

11772232 Page 47

3 30 seconds

4 45 seconds

5 60 seconds

6 120 seconds

45: Entry/Exit Tone Volume

This command sets the volume of the Entry/Exit tone from the internal

sounder. If you select option 0, the internal sounder emits no tone. Select a

value from 1 (quietest) to 9 (loudest) to set the volume (default 5). The internal

sounder demonstrates the volume when you enter the digit.

46: Tamper Alarm Response

This command specifies which sounders the control unit will activate for a

Tamper Alarm while the system is unset.

Option

0 Internal sounders only (default)

1 Keypad sounders only

2 Internal and keypad sounders

48: Lockout Keypads During Entry

This command enables you to lock keypads during entry when proximity tag

readers or remote setting devices are being used to unset the system. When

you lock keypads during entry, some functions are still available:

° Keypad PA, Fire and Medical alarms

° Duress Code operation

° User's ability to cancel false alarms or disarm the system during an alarm.

If you select option 0, the system permits all users to use all keypads during

entry. If you select option 1, the system locks all users out of all keypads

during entry (not required for Grade 2x installations).

49: Duress Code

This command selects whether the control unit supports a Duress Code (set

by the master user as described in the 9651 User Guide). Entering this code

will cause a silent communication to be sent to the Alarm Receiving Centre

(ARC) if a user is forced to unset the system by an intruder.

A duress restore is communicated on the first occasion that a normal user

access code is entered after the duress code has been used.

Option

0 Off (default). No Duress Code.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 87 88

Nessun commento

Cooper Security 9651 Manuale di Installazione Pagina 51