Cooper Security 9651 Manuale di Installazione Scaricare il pdf (Pagina 32)

3. Installation 9651

Page 28 11772232

Initial Start Up

Before applying power to the control unit, ensure that:

• All keypads have been addressed and connected.

• All external and internal sounders are connected.

• All wired zone circuits are connected.

Then:

1. Connect the battery to the control unit PCB.

2. Briefly short the Kick Start pins together (see Figure 3).

The internal sounder may sound. Ignore any display at this stage.

3. Key in the factory default User access code: 1234.

The internal sounder stops. Ignore any display or lamps.

4. Fit the case lid before applying mains power (this covers the live wiring

and closes the tamper switch).

5. Apply mains power.

6. Key in 0 followed by the factory default Engineer Code: 7890.

Note: You do not have to remove the case lid.

The display shows:

Installer Mode

You are now in installer (programming) mode.

The Programming Guide explains how to program the system.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Nessun commento

Cooper Security 9651 Manuale di Installazione Pagina 32