Cooper Security i-on40 Guida di Installazione Scaricare il pdf (Pagina 59)

i-on40 Installer Mode Programming

Page 55

enabled, or the communications outputs wired to an

appropriate communicator and correctly programmed).

This option controls the associated audible alarm.

Audible As well as starting communications the control

unit starts PA alarm tones from the keypads

and loudspeakers, and activates any siren

outputs.

Silent The control unit keeps the PA alarm silent:

there are no alarm tones from keypads or

loudspeakers and any siren outputs remain

inactive.

Displayed All keypads display a PA alert message

immediately (a user does not have to key in

their access code to see the message). The

control unit also starts PA alarm tones,

activates any siren outputs, and starts

communications.

Auto Rearm

(Appears when if System Options – DD243 – Confirmation is

set to “Off”, see page 51.)

To change the number of times that the system will re-

arm when the siren time expires select: System Options-

Auto Rearm.

Select NEVER to make the system never re-arm (the

system will go into alarm once only). Select one of the

other options to make the system re-arm once, twice,

three, four or five times, or always. The system re-arms

all closed zones, but not detectors that are still sending

alarm signals.

If the system has rearmed, then when a user enters the

system through the Final Exit door the control unit will

give an audible internal alarm in place of the normal

entry tone.

Siren Delay

When the system is set and (for example) an intruder

violates a zone, then the system waits for the

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 115 116

Nessun commento

Cooper Security i-on40 Guida di Installazione Pagina 59