Cooper Security 9651 Guida Utente Scaricare il pdf (Pagina 18)

4. Special Functions

Page 14

Press the number of the zone you want to

omit (for example, press 07 to omit zone

7) and then press .

The sounder gives a double "beep" and

the display shows the zone number

followed by an "o":

Omit Zone 07o

If you try to omit a zone for which this is

not allowed, the display shows an "X"

after the zone number.

Omit Zone 07X

Press  to exit.

Note: To include a zone that was omitted, follow the same procedure.

Pressing



toggles between omit and include.

When you set the system after omitting some types of zones, a message asks

you to confirm that you want to omit the zone. Press  to set the system with

the zone omitted.

The zone types for which a message is displayed are: Normal Alarm (NA), 24-

hour (24), Final Exit (FE), and Entry Route (ER)..

The zone types for which a message is not displayed are: Hold Up Alarm

(HUA), Fire (FR), Technical (TC), AC Fail (AC), Low Battery (LB), Battery

Fault (BF) and Fault (FL).

Key 3: Requiring User Code before Installer Code

You can specify that a user code must be entered before the installer code to

access the installer menu. This enables you to supervise installer activities.

Key in an access code (or present a tag).

Press 3 to toggle between requiring and

not requiring a user code.

The display shows (for example):

UserCode req=OFF

When you turn user code on or off, the

keypad confirms with a double "beep".

Press .

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Nessun commento

Cooper Security 9651 Guida Utente Pagina 18