Cooper Security M2000 Guida Utente Scaricare il pdf (Pagina 23)

21

Alert Messages

This section gives the meaning of the

messages that you might see when

resetting the system (page 14). Contact

your alarm company if there are problems

you cannot resolve.

ALARM 0005

08:13:45 01/01

A zone alarm has occurred. The display

shows the zone number, together with the

time and date.

PSTN LINE FAULT

12:00 Sun 01 JAN

The communication device fitted to your

alarm system is reporting a fault on the

telephone line. You may not be able to set

your system until you clear the fault.

AC Mains Fault

There is no mains power to the control unit

and the alarm system is running on its

standby battery. You may not be able to set

your system until the power is restored. If

the fault persists, the standby battery will

eventually run flat.

Battery Fault

The standby battery has developed a fault

or is disconnected. You may not be able to

set your system until the fault is cleared.

Contact your alarm company.

PANEL LID TAMPER

08:13:45 01/01

The lid of the control unit has been

removed. You may not be able to set your

system until the fault is cleared. Contact

your alarm company.

AUXILIARY X TAMP

12:00 Sun 01 JAN

The lid of an auxiliary device fitted to the

control unit is open. You may not be able to

set the system until the fault is cleared.

Contact your alarm company.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commenti su questo manuale

Nessun commento