Cooper Security i-on40 Manuale Utente Scaricare il pdf (Pagina 27)

i-on40 Administration

Page 23

3. Press > to see a more detailed description of the event.

The display will show, for example, the name you keyed in

for a user.

4. Press X to finish viewing the log.

Testing the System

If you think that your system is not working correctly then you

can use the Test option to test various peripherals. If the test

confirms that part of the system is not working then contact your

installer.

The Test option also lets you check the identity of Remote

controls, Panic Alarms and Tags.

To start testing, make sure the system is unset and the display

shows the time and date then:

1. Enter the Menu and select Test.

The display shows the Test menu.

2. Press u or n followed by > to select the part of the system

that you wish to test.

3. Press X to stop the test.

You can test each part listed in the Test menu as follows:

Siren Press > to turn the siren on and off again. The

word "On" or "Off" on the display shows whether

you should be hearing the siren.

Keypad Press each key once. The display shows the key

you pressed. Press both PA keys together to test.

Press X to end the test.

Walk test The display shows a list of all the detectors

installed on the system. The top line of the

display shows you how many detectors remain to

be tested. Walk round and trigger each detector.

Every time you trigger a detector the keypad

gives a double tone and the display shows an "A"

at the end of the line for that detector. Note that

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Nessun commento

Cooper Security i-on40 Manuale Utente Pagina 27