Cooper Security 9651 Guida Utente Scaricare il pdf (Pagina 25)

4. Special Functions

11980075 Page 25

Proximity Tags

Each normal user (Users 2 to 50) can have a tag, an access code or both.

You cannot assign a tag to the master user (U01), the installer (U00), or the

duress code (U51).

You set up a tag in a similar way to an access code (see page 23). Instead of

entering a new access code for the user, present the tag. The system learns

the identity of the tag and links it to the user number. The keypad confirms

that the tag has been learned with a double "beep".

You delete a tag in exactly the same way as an access code. When you key

in "0000", it deletes both the tag and access code for the displayed user.

Setting Time and Date

Note: Only the master user (U01) can set the system time and date.

The control unit contains an internal clock/calendar that runs as long as there

is power present (mains or stand-by battery). The system uses this clock to

record the time and date of events in the log. If the mains power supply fails

while the stand-by battery is low, you may need to correct the time and date. If

your country uses summer and winter time, you may need to adjust the time.

To set the time and date:

1. Key in the master user access code.

2. Press 6.

The display shows the date.

D04 M11 Y99

Key in two digits for the day, followed by y.

4. Key two digits for the month (01 for January to 12

for December), followed by y.

Key in two digits for the year, followed by y.

The display shows the time.

H17 M02

Key in two digits for the hour followed by y. Use

the 24-hour clock.

Key in two digits for the minutes, followed by y.

The display shows the new time and date:

18/04/2005 14:45

9x5x

1 2 ... 20 21 22 23 24 25 26 27 28

Nessun commento

Cooper Security 9651 Guida Utente Pagina 25