Cooper Security 9651 Guida Utente Scaricare il pdf (Pagina 12)

2. Everyday Operation

Page 12 11980075

Investigating Setting Problems

This section offers general guidance. If you need assistance to resolve a

problem, contact your installer.

Detector Active

If something is triggering a detector at the end of the exit procedure, the

system will not set. Depending how your installer has set up the system

internal or external sounders may operate. The display shows which zone (or

zones) is active.

To set the system:

1. Enter your access code (or present your tag) to

silence any sounders.

2. Go to the zone shown on the display (see

example) and find out what is triggering the

detector. If possible, remedy the fault.

Zone Open Z03

Zone 03

3. Return to the keypad and set the system again.

If no other detectors are active, the system sets.

4. If other detectors are active, repeat steps 1 to 3.

5. If the system still will not set, call your installer.

Installer Command 27

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Nessun commento

Cooper Security 9651 Guida Utente Pagina 12